Greatmats Classic Landscape Turf 1-3/4 Inch x 15 Ft. Wide per LF

1. Plush 1-3/4 inch pile height
2. Weather resistant and UV protection
3. Realistic landscaping turf
4. Dual layer polyproylene backing
5. Realistic color with various green and tan yarns
6. 75 ounce face weight
7. Choose for mid to low traffic areas
8. Durable polyethylene yarn

Use our Greatmats Classic Landscape Turf 1-3/4 Inch x 15 Ft. Wide per LF weather resistant and UV protected artificial grass in your backyard, courtyard or by your commercial building. It is low maintenance and is a cost effective investment, no mowing, watering, seeding or fertilizing required.

Installation of Classic Landscape Turf

Outdoor artificial turf requires a base layer 4-inch layer of compacted crushed stone or similar compacted surface. The artificial turf will need to be off-loaded from the shipping truck by hand which requires two or more people. Artificial turf can be cut to fit if needed. Seam tape may be necessary if you are putting two or more pieces together. Turf will need to be secured along the edges with nails or staples. If you want to tackle artificial turf as a DIY installation job, check out our blog and video about installing turf outdoors.

Specifications of Classic Landscape Turf

• Pile Height: 1.75 Inch
• Width: 15 Ft.
• Face Weight: 75 oz. per sq. yd.
• Total weight: 102 oz. per sq. yd.
• Primary Yarn: Polyethylene
• Secondary Yarn Thatch: Texture Polyethylene
• Polyethylene Yarn Denier: 9000/8
• Textured Thatch Denier: 4800/8
• Yarn Cross Section: Diamond
• Primary Backing: dual polypropylene layers
• Primary backing weight: 7 oz/sq yd
• Secondary coating weight: 20 oz/sq yd
• Tuft bind >8 lbs. D-1335
• Grab tear strength (Average): >200 lbs. – D-5034
• Lead content: <50 ppm – F-2765
• Total yarn linear density: 12,600 Denier – D-1577
• Elongation to break: >60 % – D-2256
• Yarn breaking strength: >19 lbs. – D-2256
• Yarn melting point: 248 F – D-7138
• Machine gauge: 3/8 inch D-5793
• Flammability: Pass – D-2859
• Water permeability: >30 in/hr – DIN 18-035
• All values are plus or minus 5 percent

Infill is required for all outdoor installations, infill is not needed for indoor installations.

A minimum of 20 linear feet is required for this product.

Maintenance

Occasionally flush with water if needed, use leaf blower to remove debris.

Shipping

Ships via freight delivery only. Please note that customers must be able to hand unload the turf rolls off the the truck. Turf rolls are heavy and will require multiple people to unload and move.